Advertisement
LOCATION OF CONTROLS
1
Function Selector (RADIO/TAPE-OFF/CD)
2
LCD Display
3
Band Selector (MW/FM/FMST)
4
FM / ST control lamp
5
IR Sensor
6
Tuning Control
7
CD Stop Button
8
CD UP-SKIP + button
9
CD DOWN-SKIP - button
10 Cassette Compartment
11 Tape Pause Button
12 Tape Stop / Eject Button
13 Tape Fast Forward Button
14 Tape Rewind Button
15 Tape Play Button
16 Tape Record Button
17 CD RANDOM Button
18 CD PLAY / PAUSE Button
19 CD REPEAT/PROGRAM Button
20 Headphone Connection
21 Volume Control
22 CD Compartment
23 CD Open / Close corner
24 FM wire antenna
25 Power Supply
26 Speaker connectors
English
3
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other
power sources may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
CONNECTIONS
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals (26) on the back of the
system. Ensure that the left speaker is connected to the left pair of terminals, and the right
speaker to the right pair of terminals.
4
English
This symbol means that this unit is double insulated. An earth connection is not
required.
Advertisement
