Graco RTX 1500 Repair And Parts Manual page 3

Electric texture sprayer
Hide thumbs Also See for RTX 1500:
Table of Contents

Advertisement

Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks.
When these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard
symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.
Fire and Explosion Hazard
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Use equipment only in well ventilated area.
• Keep work area free of debris, including solvent, rags, and gasoline.
• Ground equipment in the work area. See Grounding instructions.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
Equipment Misuse Hazard
Equipment misuse can cause death or serious injury.
Do not exceed maximum working pressure or temperature rating of lowest rated system compo-
nent. See Technical Data, in all equipment manuals.
Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturer's warnings.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not alter or modify this equipment.
Use the equipment only for its intended purpose. Call your Graco distributor for information.
For professional use only.
Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.
Do not use hoses to pull equipment.'
Comply with all applicable safety regulations.
Electric Shock Hazard
Improper grounding, setup, or usage of the system can cause electric shock.
• Turn off and disconnect power cord before servicing equipment.
• Use only grounded electrical outlets.
• Use only 3-wire extension cords.
• Ensure ground prongs are intact on sprayer and extension cords.
310645L
WARNING
Warnings
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents