Stage 4: Closing Morphoaccess - Sagem MAxx1 Installation Manual

S

Stage 4: Closing MorphoAccess™

Lip
Cover assembly
8
SAGEM SA document. Reproduction and disclosure forbidden.
Catch for the cover
assembly lip
1
When the ribbon cable has been
connected between the two
assemblies (see stage 3), the
cover assembly is fitted to the
chassis assembly.
1 - The lip on the cover slides
behind the chassis, to fit over the
catch shown on the diagram above.
2
2 - The cover is fitted onto the
chassis by rotating it.
Fit the two secured assembly
screws. Use the special screw
driver provided with the MAxx1 terminals.
E
Chassis assembly
Assembled
TM
MorphoAccess
SK-0000011322-02