Remote Starting Your Vehicle; Remote Start Shutdown; Entering Your Vehicle While It Is Running Via Remote Start; Preheating Or Precooling The Vehicle's Interior - Code Alarm PROFESSIONAL SERIES ca6554 Owner's Manual

Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the
within 2 seconds. The system will sound, the parking lights will flash 1 time and the
system will check the vehicle to ensure it is safe to start. If all safety parameters are
correct, the vehicle will start within 5 seconds. The vehicle's parking lights will turn on
(or flash depending on system settings) as a visual indication that the vehicle has
started and is running.
If your vehicle stalls or does not start, the system will pause 5 seconds, then try
2 more times to start the vehicle (a total of 3 attempts). The system will pause
5 seconds between each start attempt. If the vehicle does not start after the 3rd
attempt, the system will abort the remote vehicle start process.

Remote Start Shutdown

Press and hold the
Entering the Vehicle while it is Running via Remote Vehicle Start
1. Unlock the vehicle's doors.
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or RUN
position.
4. Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.

Preheating or Precooling the Vehicle's interior

Before exiting the vehicle, set the temperature controls to the desired setting and
operation. After the system starts the vehicle, the heater or air conditioner will
activate and heat or cool the vehicle's interior to your setting.
8
button for 3 seconds to turn the vehicle off.
button 2 times
ca6554 Owners revA