Using Your Remote Control; Arming The Security System; Passive Arming Bypass; Bypassing The Shock Sensor - Code Alarm PROFESSIONAL SERIES ca6554 Owner's Manual

Deluxe vehicle security and remote start system with 2 way confirming lcd remote control professional series
Hide thumbs Also See for PROFESSIONAL SERIES ca6554:
Table of Contents

Advertisement

Using Your Remote Control

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the
parking lights will flash 2 times, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the
response from the vehicle.

Passive Arming Bypass

If passive arming is enabled on your system, while the system is disarmed, press
+
, the system will respond with 1 chirp and the LED will turn on. The security
system will remain in this temporally bypassed state for as long as you wish. To exit
passive bypass, press the

Bypassing The Shock Sensor

To arm the system and ignore the shock sensor press
seconds press
NOTE: The system will only change the shock sensor setting for one arm cycle and
will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function

Press the
alarm function. The security system will arm with "Hidden Alarm Function" in which the
siren / horn will be silenced if the system is triggered.

Disarming the Security System

To disarm the system press the
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the
response from the vehicle. If your system is set up for 2 step unlock, a third press of
unlock will activate the audible response.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 2 seconds.
2014 Voxx Electronics Corporation. All rights reserved.
or
+
, the system will respond with 1 long chirp.
button first, within 3 seconds press the
button to activate an audible arming
button and the system will return to normal status.
button. The parking lights will flash 1 time,
button to activate an audible disarming
button. The
button, then within 5
button to activate the hidden
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents