Table of Contents
Advertisement
Configure the Data and Time settings and tap
4.
Next.
Note: Enabling Google location services can drain battery
power. For more information, refer to "Power Savings"
on page 12.
Press and hold
5.
options screen appears.
Tap Power off (
6.
Switching the Phone On or Off
If you have not already configured your phone after
an initial firmware update, you will be prompted
with a series of configuration screens.
Once the phone has been configured, you will not be
prompted with these screens again.
Important!: Before the initial configuration, you quickly access
emergency services by tapping Emergency call
and using the on-screen dialer.
Press and hold
1.
switches on.
The phone searches for your network and
after finding it, you can make or receive calls.
Note: The display language is preset to English at the factory.
To change the language, use the Language menu. For
more information, refer to "Language & Keyboard
Settings" on page 190.
until the Phone
).
until the phone
Press and hold
2.
options screen appears.
Tap Power Off (
3.
Locking and Unlocking the Phone
By default, the phone screen locks when the
backlight turns off.
Place your finger on the screen and swipe the
glass in any of the directions shown unlock
the phone.
until the Phone
).
Getting Started
13
Advertisement
Table of Contents
