SENDO Cell Phone User Manual page 35

or off, select the delay before it becomes
active and change the picture.
When the screensaver is displayed, press
χ
to return to normal display and use the
phone.
Call handling
Select this to set defaults for the way in
which you deal with incoming calls.
Active flip
When active flip is activated, all incoming
calls are accepted automatically when you
open the phone. Closing the phone ends a
call.
Auto redial
When auto redial is activated, the phone will
automatically redial a number when the call
attempt fails. If the other user's phone is
busy, the phone will wait a few seconds
before each attempt, and then beep when it
succeeds.
Auto answer
This function is only applicable when certain
hands-free accessories (e.g. a personal
hands-free headset) are connected to the
phone. When you receive an incoming call
with this feature activated, the phone rings
three times before automatically accepting
the call.
Any key answer
When this function is activated, you can
answer an incoming call by pressing any
key, except
Security
Your PIN (Personal Identity Number) code is
a code that you can use to protect your
phone from unwanted users. This is the
number that the phone asks for at switch on.
PIN Code:
1 Activate PIN entry requirement at switch
on (if your SIM card supports this).
2 Deactivate PIN entry requirement at
switch on (if your SIM card supports this).
3 Change PIN.
4 Change PIN2.
Some network services require a separate
security code. This code is the PIN2. This
menu allows you to change the PIN2 code
that the mobile asks for when using certain
features. To activate the PIN code
requirement or change the PIN code, you
need to enter the current PIN code.
If you don't know your PIN code, contact
your service provider.
ζ
Note: If you enter the wrong PIN code
three times, the SIM card is locked. You
must contact your service provider for
further instructions.
34
, Reject.
12