SENDO Cell Phone User Manual page 11

Table of Contents

Advertisement

battery indicator shows that the battery is
full, or for longer than a single day, since
overcharging may shorten its life. If left
unused a fully charged battery will
discharge itself over time.
If the battery is completely empty, it may
take a few minutes before you can make or
receive a call once you plug the phone into
a charger.
For better operation times, discharge the
battery from time to time by leaving your
phone switched on until it turns itself off and
the battery is fully discharged.
Do not attempt to discharge the battery by
any other means.
ζ
Note: Use the battery only for its
intended purpose.
ζ
Never use any charger or battery that is
damaged or worn out.
ζ
Do not short circuit the battery. All
batteries can cause property damage,
injury or burns if a conductive material
such as jewellery or keys comes into
contact with the exposed terminals. The
material may complete an electrical
circuit and become quite hot. Exercise
care in handling your phone battery. For
example, avoid carrying your phone
battery loose in a pocket or bag. This
product is designed for use with
Sendo-approved batteries only. Use of
unapproved batteries may be
dangerous and may cause damage to
the battery or the phone and may void
your warranty.
ζ
Leaving the battery in hot or cold places,
such as in a closed car in summer or
winter conditions, may reduce the
capacity and lifetime of the battery.
Always try to keep the battery between
59 F and 77 F (15° C and 25° C). A
phone with a battery that has been
exposed to temperature extremes may
temporarily not work, even when the
battery is fully charged.
Dispose of the battery properly. Comply
with all local laws or regulations in disposing
of your battery. Do not dispose of batteries
in a fire.
Powering up/down
To switch the phone on, press
phone asks for a PIN code: Enter the code
that is supplied with the SIM card. The code
will be displayed as asterisks.
When complete, press
seconds while the phone searches for the
network. Once the network has been found,
the main screen appears and your phone is
ready to be used. The main screen shows
the network name and two icons giving the
signal strength (top right) and battery level
(top left).
To switch the phone off, press and hold
.
10
. If the
, OK. Wait a few
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents