Canceling A Cycle; Panel Lights - KitchenAid Sculptura KUDH24SE Use And Care Manual

Canceling a cycle
You can cancel a cycle anytime during
the cycle.
1. Press the Cancel pad once, then wait.
The Cancel light will glow. There
is a 5-second pause between the
time Cancel is pressed and
draining begins.
2. Let the dishwasher drain completely.
Option selections
Press a pad to select an option. If you
change your mind, press the pad again to
turn the option off. To select a different
option, press another pad.
High Temp. Wash
Select this option, and water will heat during
the main wash for better cleaning
of heavily soiled dishes. Water
heating is automatic in the wash
portions and final rinse of the Pots
& Pans cycle, and in the final rinse of the
Normal and Light China cycles.
Energy Saver Dry
Use this option to air dry dishes without heat.
For best results, keep the rinse
agent dispenser filled. Under certain
conditions (hard water, empty rinse
agent dispenser, plastic items in the
load, etc.) you might find some water left on
plastics, dishes, and silverware.
Control panel lights
Clean Light
The Clean light glows when a cycle has
finished. All other
CLEAN
lights will turn off.
The Clean light will
turn off when you
open the door.
Water Heating Light
The Water Heating light glows while water in
the dishwasher is
WATERHEATING
heating. Wash or
rinse action contin-
ues while the water
heats.