Changing Or Selecting The Weighing Method; Zeroing The Scale While Running Mail - Pitney Bowes Connect+ 1000 Operator's Manual

Chapter 3
NOTE: You are only prompted to enter a country if the job does not have a country stored,
or if you have re-powered the system. Once you enter a country, the system stores it and
will continue to use it. In order to change it, you must select a different destination by touch-
ing or selecting the Destination option in the Job Properties list on the left side of the Run
Mail screen.

Changing or Selecting the Weighing Method

1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select the Weighing icon.
3. Select the appropriate weighing method:
WOW
l
WOW, first piece only
l
Attached scale
l
Differential weighing
l
Manual weight entry
l
NOTE: If your system does not have the optional WEIGH-ON-THE-WAY® (W-O-W®) or
Manual weight entry method, you need to select the Attached scale method.
4. Select OK.
NOTE: If you are running mail with mixed sizes and weights, refer to How do I run mail that
has different sizes and weights.

Zeroing the Scale while Running Mail

Use this if you have an attached scale and it displays a weight greater than zero when there
is nothing on the scale.
1. Select the Run Mail button from the Home screen.
2. Select the Weighing icon.
3. Select the Attached scale option.
4. Select or touch the Zero scale button under the current weigh.
59
SV62250 Rev. G