Cpu Configuration - Supermicro SuperO X10DRC-T4+ User Manual

X10DRC/i-LN4+/-T4+ Motherboard User's Manual

CPU Configuration


This submenu displays the following CPU information as detected by the BIOS. It
also allows the user to configure CPU settings.
•
Processor Socket
•
Processor ID
•
Processor Frequency
•
Processor Max Ratio
•
Processor Min Ratio
•
Microcode Revision
•
L1 Cache RAM
•
L2 Cache RAM
•
L3 Cache RAM
•
CPU 1 Version
•
CPU 2 Version
Clock Spread Spectrum
Select Enabled to allow the BIOS to monitor and attempt to reduce the level of
Electromagnetic Interference caused by the components whenever needed. The
options are Disabled and Enabled.
Hyper-Threading (All)
Select Enable to support Intel's Hyper-threading Technology to enhance CPU per-
formance. The options are Enable and Disable.
Cores Enabled
This feature allows the user to determine the number of CPU cores to enable. Enter
"0" to enable all cores. There are 14 cores available in the system. The default set-
ting is 0, which enables all CPU cores in the system.
Execute Disable Bit (Available if supported by the OS & the CPU)
Select Enable for Execute Disable Bit Technology support, which will allow the
processor to designate areas in the system memory where an application code
can execute and where it cannot, thus preventing a worm or a virus from flooding
4-6