Hdd/Uid Led; Nic1/Nic2 Led Indicators - Supermicro SuperO X10DRC-T4+ User Manual

HDD/UID LED

The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable to pin 14 to show HDD activity
status. Attach a cable to pin 13 to use
UID switch. See the table on the right
for pin definitions.

NIC1/NIC2 LED Indicators

The NIC (Network Interface Control-
ler) LED connection for LAN port 1 is
located on pins 11 and 12 of JF1, and
the LED connection for LAN Port 2 is
on pins 9 and 10. Attach the NIC LED
cables here to display network activity.
Refer to the table on the right for pin
definitions.
BAR CODE
MAC CODE BIOS
LICENSE
SAN MAC SAS CODE
X10DRC/i-LN4+(-T4+)
Rev. 1.01
IPMI CODE
2-23
Chapter 2: Installation
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 UID Switch
14 HD Active
GLAN1/2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
10 NIC 2 Link LED
11 NIC 1 Activity LED
12 NIC 1 Link LED
A. HDD/UUID Switch
B. NIC1 LED
C. NIC2 LED
20
Ground
X
FP PWRLED
A
HDD LED
B
NIC1 Link LED
C
NIC2 Link LED
OH/Fan Fail/
PWR Fail LED)
Power Fail LED
Ground
Ground
2
19
NMI
X
3.3 V
UID Switch
NIC1 Activity LED
NIC2 Activity LED
UID LED
3.3V
Reset
Reset Button
Power Button
PWR
1