Using The Usb Function; Inserting The Storage Medium; Functions - Telefunken P5 Operating Manual

Using the USB function

Note:
The memory capacity of the USB device is not limited.
Due to the wide variety of MP3 Flash Players, USB
storage media and USB HDD drives available, it cannot
be guaranteed that every model will be supported.
USB version 1.0 and 2.0 devices are supported.
When connecting USB media the unit or the medium
may "freeze" as a result of electrostatic charging. If this
occurs, carry out a reset (see page 2).

Inserting the storage medium

Connect the USB medium using the USB port (16).
Set the FUNCTION switch (20) to USB/CARD; the
unit switches on.
Press the USB/CARD button (6) to select USB or
SD/MMC mode (only in STOP
The display changes to "USB" and the data located
on the storage medium is read. The USB medium
need not be switched on. The total number of the
medium's albums and tracks is displayed.
mode).
Before starting to use the medium, wait until all of its
content has been read to ensure that all of the
necessary information has been read. If a storage
medium is not inserted or cannot be read, the NO
USB indicator appears in the display (17).
The playback of the first track starts automatically.
Stop playback: Press the STOP
total number of albums and tracks appears in the
display (17).

Functions

Other operations and playback functions are as
described under "Playing a disc", see page 17.
Removing the storage medium
Simply remove the USB storage medium or MP3
Flash Player by disconnecting it.
Using the USB function
button (11); the
21