Daewoo G424 Gasoline Service Manual page 138

Notch
Frout bearing cap
Wave washer
Front
bearing
cap
Rocker cover
Front mark Indentification
No.2 No.3
G424 Service Manual
6EN0575
No.1 intake
side rocker
arm
6EN0576
Mounting bolt hole
Mark
No.4
6EN0024
Installation Service Points
A Camshaft installation
Apply engine oil to the journals and cams of the camshafts.
Install the camshaft on the cylinder head.
B Rocker shaft installation
Insert the rocker shafts into the front bearing cap so that the
notches on the shafts face up, and insert the installation bolts
without tightening them.
C Wave washer installation
Install the wave washer in correct direction as shown.
D Bearing cap
(1) No.3 bearing cap looks very similar to No.2 and No.4
bearing caps.
NOTE: No.2 bearing cap is the same as No.4 bearing cap.
(2) Install the bearing caps with their front marks pointing to
the camshaft sprocket side.
137 Base Engine Service Procedure