Quicktime System Requirements; Auto Power Save (Data-Transfer Mode) - Minolta Dimage 7Hi Owner's Manual

Minolta dimage 7hi digital camera owner's manual
Hide thumbs Also See for Dimage 7Hi:
Table of Contents

Advertisement

The last window will confirm the driver has
been installed. Click "Finish" to close the
add new hardware wizard.
138
D
-
ATA
TRANSFER MODE
The add new hardware wizard will confirm
the location of the driver. One of three
drivers may be located: MNLVENUM.inf,
USBPDR.inf, or USBSTRG.inf. The letter
designating the CD-ROM drive will vary
between computers. Click "Next" to install
the driver in the system.
When the my-computer window is
opened, a new removable-disk icon will
be displayed. Double click on the icon to
access the camera's memory card, see
page 140.
CONNECTING TO MAC OS 8.6
To access this camera with a computer with Mac OS 8.6, the USB storage support
software must be installed first. This software is supplied by Apple Computer, Inc. free
of charge. The latest version can be downloaded from the Apple Software Updates web
site at http://www.apple.com/support.
To download and install this software, follow the instruction on the Apple web site.
Always read the attached terms and conditions before installing any new software.

QUICKTIME SYSTEM REQUIREMENTS

To install QuickTime, follow the
instructions in the installer. Macintosh
users can download the latest version
of QuickTime free of charge from the
Apple Computer web site at
http://www.apple.com.

AUTO POWER SAVE (DATA-TRANSFER MODE)

If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click "OK." Neither the camera or
computer will be damaged in this operation.
Pressing the shutter-release button will reactivate the camera. Remake the USB
connection with the data-transfer menu (steps 5 and 6 on page 133).
IBM PC / AT compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
2000 Professional, or XP.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
139

Advertisement

Table of Contents
loading

Table of Contents