Function Setup - Radio Shack 1200093 User Manual

• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
• If you do not plan to use the weather radio with
batteries for a week or more, remove the batteries.
Batteries can leak chemicals that can damage
electronic parts.
3
Listen to a Weather Channel
When you turn on the weather radio the first time, all
LCD segments light for a few seconds, and the automatic
channel search begins. When an active channel is found,
Ê
appears. If no channels are detected,
1. Press WEATHER/SNOOZE to listen to the weather
broadcast.
2. Press ) or ( to adjust the broadcast volume to the
desired level. VOL and the volume level (1 – 8) appear.
3. Press WEATHER/SNOOZE to turn off the broadcast.
4. Press ) or ( to adjust the weather alert volume to
the desired level. VOL and the volume level (1 – 8)
appear.
4

Function Setup

Function setup allows you to select a broadcast channel,
and set the alarm and clock time. You can also enable or
disable the signal loss reminder so that an alert sounds
when the radio signal is lost.
©
flashes.
6