CONTENTS
Connecting to Vehicle
Connecting an Optional
Care ......................................... 12
o
o
WARNING
Mount the CB securely to avoid
damage to the CB or vehicle, and
to avoid injury to anyone in the
vehicle during sudden starts or
stops.
2
CB RADIO SETUP
Your CB's display is protected during shipment by a piece of
2
clear film. Carefully peel off this film before using your radio.
A
M
TTACH THE
You can attach the microphone holder horizontally or
vertically to either side of your CB.
Vertical
To attach the microphone holder somewhere else, follow
these steps.
1. Use the microphone holder as a template to mark the
positions for the mounting screws at the desired
mounting location.
2. Drill a hole at the marked position. Do not drill into
anything behind the mounting surface.
3. Attach the microphone holder to the mounting surface
using the supplied (small) machine screws and
lockwashers.
M
CB
OUNT THE
Find a convenient location in your vehicle to mount your CB.
If you are uncomfortable mounting the CB yourself, consult
with your vehicle service center or automotive dealer for
o
assistance.
Select a mounting location where:
• you can easily reach the CB.
• wires and cables are clear of the vehicle's pedals or
other moving parts.
• the CB is not directly in front of heating vents.
• all wires and cables can reach their connection points.
1. Use the mounting bracket as a template to mark the
positions for the screws on the mounting surface.
H
ICROPHONE
OLDER
Microphone
Holder
Horizontal