Procedure 2.1 - Determining Software Version And Total Floors Climbed - Precor C776i Manual

Procedure 2.1 - Determining Software Version and Total
Software version numbers are invaluable for tracking and identifying problems and staying aware
of changes to the operation and features of the product.
Procedure
Note: In order to perform this procedure the climber must remain in the "powered up" condition. It
is necessary to use the climber in order to keep the climber in the "powered up" condition, unless
the climber is equipped with an optional external power supply.
With the climber "powered up", press keys RESET, 6, 5, sequentially.
1.
Diagram 2.1 - C776i Console
Key 1
The message INFORMATION DISPLAY will be displayed for two seconds and then
2.
ODOMETER for two seconds. The total number of floors climbed will be displayed as XXX
FLOORS. Press the ENTER key to continue to the total time display.
The message HOURMETER will be displayed for two seconds. The total hours of use will
3.
then be displayed as XX HOURS. Press the ENTER key to continue to the software version
display.
Floors Climbed
Key 4
C776i Stairclimber
Key 7
Page 7