Stippling; Clasp Stitches; Free Motion Quilting (1) - Janome Memory Craft 8900QCP Instruction Manual

Janome MC8900 Instruction Manual
q
e
q
e
e
q
www.aaasewing.com
w
r
w
r
q w
r
w

Stippling

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
A pre-programmed stippling stitch is a fast and easy
method to quilt small areas.
Place a quilt layer and sew.

Clasp stitches

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
You can close quilt layers and using the clasp stitch.
Select stitch pattern 106. Press the memory key.
Select pattern L.S.
Start sewing.
The machine sews clasp stitch and locking stitch then
stops automatically.

Free Motion Quilting (1)

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
t
r Foot pressure:
t Feed dog:
Attaching the convertible free motion quilting foot
Attach the needle plate for straight stitch (refer to page 16).
e
Loosen the setscrew and remove the foot holder.
Attach the convertible free motion quilting foot to the
presser bar and tighten the setscrew rmly with the
screwdriver.
Place the fabric under the foot.
Adjust the height of the foot by turning the round nut until
bottom of the foot barely touches top of the fabric.
q Setscrew
w Presser bar
e Round nut
78
Janome Quilting & Sewing Machine
103
AUTO
Satin stitch foot F or
Open-toe satin stitch foot F2
5
can also be used.
106
AUTO
Satin stitch foot F
5
D4S
AUTO
Convertible free motion quilting
foot QB-S
5
Lowered
MC8900 Owners Manual/ User Guide