Darning - Janome Memory Craft 8900QCP Instruction Manual

Janome MC8900 Instruction Manual
e
z x c
e
r
r
e
www.aaasewing.com
q w
r
q
w

Darning

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
z Attach the automatic buttonhole foot R and pull the
button holder all the way out.
Place the fabric under the foot, and lower the needle
at the starting point. Then lower the foot.
q Button holder
w Starting point
x Start the machine and sew to the required length, then
press the reverse button. This sets the darning length.
Continue sewing until the machine stops automatically.
e Reverse button
r Required length
c Sew another layer of darning over the rst layer, at a
right angle to it.
NOTE:
The maximum darning length is 2 cm (3/4) and the
maximum width is 0.9 cm (3/8).
To sew the same size darning
When nished sewing, a conrmation message will
appear.
Simply start the machine to sew another darning in the
same size.
To sew the next darning in a different size, press the
memory key.
To sew a shorter darning
Sew the rst line to the desired length and stop the
machine.
Press the reverse button and start the machine again.
r
The machine will sew the rest of the darning and stop
automatically.
67
Janome Quilting & Sewing Machine
35
AUTO
Automatic buttonhole foot R
5
MC8900 Owners Manual/ User Guide