Tacking - Janome Memory Craft 8900QCP Instruction Manual

Janome MC8900 Instruction Manual
e
→
w
q
r
www.aaasewing.com
q w
r
→
w
→
e

Tacking

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Tacking is used to reinforce pockets, crotch seams and
belt carriers where extra strength is needed.
Sewing
Lower the needle at the starting point.
q
Lower the foot and sew until the machine stops
automatically.
The machine will sew a tacking 1.5 cm (9/16) long
automatically.
q Tacking
w Starting point
e 1.5 cm (9/16)
e
Sewing a shorter tack
To sew a tack shorter than 1.5 cm (9/16), rst stop the
machine after sewing the required length, and then press
the reverse button.
The required length has been determined.
Start the machine and continue sewing until the machine
stops automatically.
q Starting point
w Required length
e Tack length
r Reverse button
Sewing the same size tack
To sew another tack at the same size, simply start the
machine and it will stop automatically when nishing
sewing.
Sewing the tack at a different size
To sew the next tack at a different size, press the memory
key to memorize a new size and start sewing from the
beginning.
69
Janome Quilting & Sewing Machine
36
AUTO
Satin stitch foot F
5
MC8900 Owners Manual/ User Guide