Removing The Thermal Module - Packard Bell ENTK83 Series Service Manual

Removing the Thermal Module

1. See "Removing the Upper Cover" on page 66.
2. Disconnect the fan cable.
Discrete
3. Remove the four (4) securing screws (in reverse numerical order from screw 4 to 1) from the thermal module.
In the discrete model, remove two (2) additional screws (in reverse numerical order from screw 6 to 5).
Discrete
3
1
Step
Thermal Module
(Discrete only)
84
2
4
Size
M1.98*3 (red
callouts)
M2.5*5 (green
callouts)
3
1
Quantity
4
2
UMA
UMA
2
4
Screw Type
Chapter 3