Display During The Operating Sequences - Siemens Euroset 825 Operating Instructions Manual

22.1.97
The menus
o
N

Display during the operating sequences

The recurring sequence of actions used to call and activate a menu item is shown in
simplified form in the working sequences of these operating instructions.
The action of "choosing" comprises the following steps:
selecting the menu item with either the forward
n
and confirming this selection by pressing the OK key
n
The intermediate displays are not shown.
Example:
Suppose you want to set the tone ringer volume.
c
f
< >
Audio settings?
< >
Tone ringer volume?
12
825I-E2.FM NEC, euroset 825 IM English: A30350-X102-X22-1-7619
Use the number keys "1" to
"7" to set the volume.
The new volume is stored.
Lift the handset.
Press the F key.
Choose "Audio settings"
from the menu.
Choose "Tone ringer volume"
from the menu.
You will see the tone ringer
volume that has been set
(with each level repre-
sented by two boxes), and
you will hear what it sounds
like.
Tone ringer volume:
Entry stored!
or backward key,
> <
N
Phone book?
Phone menu:
Phone book?
Audio settings:
Speaker volume?
Tone ringer volume: