Throttle Cable Freeplay; Steering Assembly - Polaris Trail Boss 330 Owner's Manual

Hide thumbs Also See for Trail Boss 330:
Table of Contents

Advertisement

Throttle Cable Freeplay

Adjust throttle cable freeplay at
the handlebar.
1. Locate the throttle cable
adjuster at the handlebar.
2. Squeeze the end of the rub-
ber boot and slide it far
enough to expose the end of
the inline cable adjuster.
3. Loosen the adjuster lock nut.
4. Rotate the boot to turn the
adjuster until 1/16" to 1/8"
(1.5-3 mm) of freeplay is
achieved at the thumb lever.
While adjusting freeplay, be
sure to flip the throttle lever
back and forth.
5. Tighten the lock nut.
6. Squeeze the end of the rub-
ber boot and slide it over the
cable adjuster to its original
position.

Steering Assembly

The steering assembly of the ATV should be checked periodically for
loose nuts and bolts. If loose nuts and bolts are found, see your
POLARIS dealer for service before operating the vehicle.
MAINTENANCE
Boot
Lock Nut
Adjuster
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 trail boss 3302013 trail blazer 330

Table of Contents