Appendix I - Specifications - Pride Mobility Quantum 1103 Ultra Series Owner's Manual

Quantum series
Table of Contents

Advertisement

A P P E N D I X
Suspension:
Drive Wheels:
Caster Wheels:
Anti-tip Wheels:
Maximum Speed:¹
1
Range:
Brakes:
Ground Clearance:²
Turning Radius:²
Overall Size:²
Drivetrain:
Batteries:³
Battery Charger:
Weight Capacity:
Component Weights:
¹
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors,
controller type, tire type, and tire condition. This specification can be subject to variance of (+ or – ) 10%.
²
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of
(+ or – ) 3%.
³
AGM or Gel-Cell type required. See VII. "Batteries and Charging."
NOTE: All specifications subject to change without notice.
Quantum 1103 Ultra Series
I
-
SPECIFICATIONS
Active-Trac
10 in. (25.4 cm), pneumatic or solid, center-mounted
8 in. (20.32 cm), solid, rear-mounted
5 in. (12.7 cm), solid, front mounted
Up to 4 mph (6.43 km/h)
Variable up to 12 miles (19 km)
"Intelligent Braking," electronic regenerative, disc park brake
See figure 28.
See figure 28.
Length: See figure 28.
Width: See figure 28.
Two motor, mid-wheel drive
Two 12-volt, deep-cycle U-1 batteries
4-amp, onboard (standard)
Off-board (required with TRU-Balance Power Positioning Systems)
300 lbs. (136 kg)
200 lbs. (90.7 kg) with TRU-Balance Power Positioning Systems
160 lbs. (72.57 kg) with Synergy Manual Tilt
Base: 92 lbs. (41.73 kg)
Batteries: 24.5 lbs. (11.11 kg) each
www.quantumrehab.com
S P E C I F I C A T I O N S
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quantum 1103 ultra 2sp

Table of Contents