Pride Mobility Quantum 1103 Ultra Series Owner's Manual page 27

V . C O M F O R T
Foot Platform Height Adjustment
The foot platform height is easily adjusted to several differ-
ent heights.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot
platform bracket. See figure 18.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot platform
bracket. See figure 18.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot platform
bracket and tighten.
Quick Release Fasteners: The foot platform is attached
to the power base with two quick release fasteners. See
figure 18. Each quick release fastener consists of a bolt, a
lever, and a nut. See figure 19. The lever has a cam on the
end that allows it to clamp into place. The quick release
fastener has two states: clamped and unclamped. When the
lever is open, the quick release fastener is unclamped. When
the lever is closed, the quick release fastener is clamped.
To clamp the quick release fastener:
1. Make sure the lever is in the open position.
2. Turn the nut clockwise until it is snug.
3. Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed
position, then turn the nut counterclockwise one-
quarter or one-half turn.
Quantum 1103 Ultra Series
A D J U S T M E N T S
FOOT PLATFORM BRACKET
Figure 18. Foot Platform Adjustment
Figure 19. Quick Release Fastener Operation
www.quantumrehab.com
QUICK RELEASE FASTENERS
NUT
BOLT
LEVER (OPEN)
UNCLAMPED
FOOT PLATFORM
RETAINING PIN
LEVER (FULLY CLOSED)
CAM
CLAMPED
27