Panasonic LUMIX DMC-FS42 Operating Instructions Manual page 61

l [TV ASPECT]
• This will work when the AV cable is connected.
@ [VERSION DISP.]
v [FORMAT]
• Use a battery with sufÚcient power or the AC adaptor (optional) when formatting. Do not
turn the camera off when formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory,
remove the card.
• If the card has been formatted on a PC or other equipment, format it on the camera
again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service
Centre.
9 [LANGUAGE]
• When you set to other language by mistake, select [9] from the menu icons to set the
desired language.
. [AUTO DEMO]
• Press any button, such as [MENU/SET], to close [AUTO DEMO].
• [AUTO DEMO] has no TV output capability.
Preparation
Set to match the type of TV. (Playback Mode only)
[ } ]:
When connecting to a 16:9 screen TV.
[ + ]:
When connecting to a 4:3 screen TV.
It is possible to check which
version of Úrmware is on the
camera
Initializes the built-in memory or card. Formatting
irretrievably deletes all the data so check the data
carefully before formatting.
Set the language displayed on the screen.
The camera's features are displayed as a slide show.
[OFF]/[ON]
- 27 -