Connecting To The Internet - Nintendo New 3DS Operation Manual

Connecting to the Internet

Once you have everything you need to connect to the internet, you can start configuring the settings on your system.
Note: In order to connect to the internet when using a Nintendo DS Game Card, you must configure Nintendo DS Connections.
1
Touch CONNECTION SETTINGS
2
Touch NEW CONNECTION
Find your ideal settings with the tutorial
Touch TUTORIAL to receive help with the connection setup process. Follow the instructions
on-screen and select options to configure the right settings for your connection.
•
For AOSS guidance, see p. 45.
•
p. 46.
For Wi-Fi Protected Setup guidance, see
•
For guidance on searching for and configuring access points, see
Setting up a connection without the tutorial
If you would rather set up your connection without assistance, touch MANUAL SETUP instead,
then select from the options displayed to configure your connection.
•
For AOSS guidance, see p. 45.
•
For Wi-Fi Protected Setup guidance, see p. 46.
•
For guidance on searching for and configuring access points, see
44
p. 47.
p. 47.
Connecting using AOSS
If your access point supports AOSS, you can set up a connection quickly and easily. Refer to the instruction manual for your access point in addition
to this manual.
Note: Using AOSS may cause your access point settings to change. If your computer is connected to the access point without using AOSS, it may
no longer be able to connect after using AOSS. Establishing a connection using an access point found through a search will not change any of
the access point's settings ( p. 47).
Touch AOSS
1
Note: If you are using the tutorial and you have selected
2
Steps for the access point
Press and hold the AOSS button on the access point until the
AOSS light flashes twice in succession.
Note: If you have tried and failed several times to set up a connection using AOSS, wait approximately
5 minutes before trying again.
Once the setup complete screen appears, touch OK to begin a connection test
3
•
If the test is successful, setup is complete.
•
Failure to establish a connection can sometimes occur after AOSS setup is complete. If this happens, please wait a short while
before trying to reconnect.
, start from step .
2
AOSS button
45