Storing Frequencies; Searching For And Temporarily Storing Active Frequencies - Radio Shack Realistic PRO-2030 Manual

STORING FREQUENCIES

Your scanner has 90 channels into which you can store frequencies.
Follow these steps to store a frequency into a channel.
1. Press MAN. Enter the channel number you want to program.
2. Press PGM. PROGRAM appears on the display to indicate that the scanner is in the
programming mode.
3. Enter a frequency.
4. Press ENTER to store the frequency.
Notes:
• If you made a mistake in Step 3, Error appears on the display. Press CLEAR and repeat
Step 3.
• Your scanner automatically rounds down the entered frequency to the nearest valid
frequency. For example, if you try to enter a frequency of 151.4730, your scanner
accepts it as 151.4750.
5. Repeat Steps 1-4 to program more channels.
Note: If you want to program the next channel in sequence, repeat Steps 2-4.

SEARCHING FOR AND TEMPORARILY STORING ACTIVE FREQUENCIES

Good references for active frequencies are RadioShack's "Police Call Guide Including Fire and
Emergency Services," "Official Aeronautical Frequency Directory" and "Maritime Frequency
Directory." We update these directories every year, so be sure to get a current copy.
If you do not have a reference to frequencies in your area, use these procedures to search for a
transmission.
Note: Press DLY if you want to make the scanner pause 2 seconds after a transmission ends before it
proceeds to the next frequency.