Exterior Lamps Off; Reminder; Headlamp High/Low-Beam; Flash-To-Pass - Chevrolet Corvette 2015 Owner's Manual

6-2 Lighting
To override AUTO mode, turn the
control to .
To reset to AUTO mode, turn the
control to and then release back
to AUTO. Automatic mode also
resets when the vehicle is turned off
and then back on again if the control
is left in the AUTO position.
(Parking Lamps): Turns on the
parking lamps including all lamps,
except the headlamps.
The parking lamp indicator light
comes on and stays on when the
parking lamps are on with the
engine off and the ignition to ACC/
ACCESSORY.
(Headlamps): Turns on the
headlamps together with the parking
lamps and instrument panel lights.

Exterior Lamps Off

Reminder

A warning chime will sound if the
exterior lamp control is left on in
either the headlamp or parking lamp
position and the driver door is
opened with the ignition off.
Headlamp High/
Low-Beam Changer
Push the turn signal lever away
from you and release to turn the
high beams on. To return to low
beams, push the lever again or pull
it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

To use the flash-to-pass feature,
briefly pull the turn signal lever
toward you. The high-beam
indicator flashes to indicate to the
other driver that you intend to pass.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day. DRL are required on all
vehicles first sold in Canada.
The DRL system makes the
dedicated lamps come on when the
following conditions are met:
It is still daylight and the ignition
is on.
The exterior lamp control is in
the AUTO position.
The transmission is not in
P (Park) or the parking brake
is off.