Chevrolet Corvette 2015 Owner's Manual page 55

2-26 Keys, Doors, and Windows
3. Line up the rear roof panel pins
so that they drop into the
receivers on the back of the
storage area.
4. Press down firmly to seat the
pins in the rear receivers.
Installing the Roof Panel
Warning
An improperly attached roof panel
may fall into or fly off the vehicle.
You or others could be injured.
Warning (Continued)
After installing the roof panel,
always check that it is firmly
attached by pushing up on the
underside of the panel. Check
now and then to be sure the roof
panel is firmly in place.
Installing the roof with the release
handles in the closed position
could cause damage to the
interior trim. Always move
handles to the open position
when installing the roof.
It is easier if two people install the
roof panel.
1. Shift an automatic transmission
into P (Park). Shift a manual
transmission into 1 (First) or
R (Reverse).
(Continued)
Caution
2. Turn the ignition off and set the
parking brake.
3. To remove the roof panel, pull up
on the rear edge and remove it
from the storage area.
4. Carefully place the roof panel
over the top of the vehicle.
5. Position the rear edge of the roof
panel next to the weatherstrip on
the back of the roof opening.
Then align and fit the pins at the
rear of the roof panel inside the
openings in the rear overhead