Download Print this page

Configuration System; Machine Information - Citizen Z-START CLP-521Z Quick Start Manual

Thermal label & barcode printer
Hide thumbs Also See for Z-START CLP-521Z:

Advertisement

1
Introduction
What does the "Z" mean?
Label printers talk a variety of different languages! Our printers
usually use their own Citizen language but we have created a
version that specifically understand the ZPL
Zebra
®
.
So your CLP 521Z or CLP 621Z printer understands this ZPL
language instead of the normal Citizen language.
How does this affect me?
In normal operation, you will notice no difference in operation of
your printer. It will still print labels in the same way and media
and ribbons are loaded in exactly the same way to a normal printer.
Please refer to the other quick-start guides for details of media
loading and operation of the printer.
However, the configuration and setup of some of the printer's
internal settings will be a little different. This may not affect you
either if your printer can be used in an 'out of the box'
configuration.
What does this guide say?
This guide explains the differences in the printer's configuration
system and also explains the best printer driver to use with
different applications including the Windows
Windows
is a registered trademark of Microsoft Corporation in the United States
®
and/or other countries. ZPL
and Zebra
are registered trademarks of Zebra
®
®
Technologies (ZIH Corp) in the United States and/or other countries.
2
language from
®
®
operating systems
®
Using VuePrint

Configuration System

TM
How to Use VuePrint
The VuePrint menu system is used to make changes to the settings of
the printer. Please refer to the Quick Start Guide for more details on
its operation. You can access the VuePrint system by switching on
the printer holding down the [MODE] key.

Machine Information

This section of the print out will give you details specific to your
printer, such as the version of firmware, total distance printed by your
printer and the media sensor or optional interfaces.
Current Menu Settings
The "Page Setup", "After Print" and "Interface" menus are exactly the
same on these printers. However, the System Setup menu has some
different parameters.
-
The Metric/Inch option is only used to change the display in the
VuePrint menu output and has no effect on printer operation and
layout
-
The Control Prefix, Format Prefix and Delimiter Prefix are all
changeable in these printers. This changes the 'command codes'
that the printer recognizes as actions for the printer. You will
only need to change this for specific customer applications.
-
The "Media Power Up" option (either On or Off) determines
whether or not the printer feeds the paper to the top-of-form
(start of a new label) when the printer is turned on. This is "on"
by default but you may choose to switch this off for certain
applications.
-
The "Control Code" and "Emulation Select" menu options are
not present or needed on the CLP 521Z or 621Z printers.
TM

Advertisement

loading

This manual is also suitable for:

Z-start clp-621z