Switching The Connected Cellphone; Deleting Registered Cellphones; Using Cellphones; Screen During A Telephone Call - Clarion NX503E Owner's Manual

• Problems on some cellphones sometimes
cause communication errors or prevent
operations from being performed or
displayed properly. If this happens, switch
the Bluetooth functions off then back on
again. (Default: OFF)
• When switching the Bluetooth functions
on the cellphone off then back on again,
do the same for the Bluetooth functions
on the unit.
• When Bluetooth functions are turned off,
Bluetooth functions on the unit cannot
be operated. Also, connection to and
operations of the unit from Bluetooth-
compatible cellphones are no longer
possible.
Switching the connected
cellphone
When two or more Bluetooth-compatible
devices are registered to the unit, the device
to be connected can be switched.
Notice
• Though up to five Bluetooth-compatible
devices can be paired, only one can be
connected to at any one time.
1
MENU
2
Set at [BT Devices Connection]
3
Select for the device to be
switched
4
Select the Bluetooth connection
mode
The screen switches to the telephone
call screen.
28 NX503E/FX503E
MEMO
• When a cellphone currently in use is
switched, the device information including
the incoming/outgoing calls log also is
switched to the information of the other
cellphone that you switched to.
• When a cellphone is restarted,
some cellphones sometimes are not
automatically switched to. If the cellphone
is not automatically switched to, select
the cellphone that you want to connect to
by this operation.

Deleting registered cellphones

You can delete the information of paired
Bluetooth-compatible devices.
1
MENU
2
Set at [BT Devices Connection]
3
for the device you want
to delete
4
OK
MEMO
• Bluetooth Audio devices other than
cellphones also can be deleted.
• When the registration information of
a cellphone is deleted, the incoming/
outgoing calls log and phonebook
information of the corresponding
cellphone also are deleted.
• When the unit is turned off while cellphone
registration information is being deleted,
the information sometimes cannot be
deleted. If this happens, turn the unit on
and try deleting the information again.

Using cellphones

Attention
• Do not leave cellphones inside the vehicle.
The inside of the vehicle gets hot under
the blazing sun, for example, and might
cause them to malfunction.

Screen during a telephone call

The following screen is displayed during a
telephone call:
Screen during a telephone call
:
This displays the option screen.
:
This mutes the phone outgoing volume.
:
This switches to telephone calls on the
cellphone unit.
Private call operation is sometimes not
switched to depending on the cellphone
you are using.
:
This ends the telephone call.
:
When the number entry screen is
displayed, enter the numbers for the
password, etc. during the telephone call.
Pressing NAVI AV during a telephone call
switches the screen as follows. With this
screen displayed as it is, operations such as
searching for a destination can be performed.
Map screen during a telephone call
The call is disconnected and the current
position is displayed.
The call time, name of
other party or telephone
number is displayed.
This switches to telephone calls on the
cellphone unit.
This toggles the telephone control bar
between display and hide.
MEMO
• With some cellphone models, incoming
calls are automatically rejected when
there is an incoming call from a third party
during a telephone call. The incoming
calls log is not saved.
• When the vehicle moves outside the
cellphone service area during a telephone
call (i.e.to an area where radio waves
cannot be received), the line will be
disconnected.
• During hands free telephone calls, the
audio source cannot be switched or
selected.
• It may not be possible to make or receive
calls unless the cellphone is in standby.