To Add Supplemental Power To A Single Pcie2 Card Using The 8-Pin Adapter Cable - Sun Microsystems Ultra 27 Service Manual

Adding Supplemental Power to PCIe2 Cards
If necessary, connect the 6–pin splitter cable to the 6–pin auxiliary power supply cable.
2
Connect the 6–pin connectors of the splitter cable to the 6–pin connectors on the PCIe2 cards.
3
Secure the cable in the cable retainer.
4
▼
To Add Supplemental Power to a Single PCIe2 Card
Using the 8–Pin Adapter Cable
Use this procedure to add supplemental power to a single PCIe2 card that requires the use of the
8–pin adapter cable (for example, Nvidia Quad FX5800).
You must have the auxiliary 8–pin to 6–pin adapter cable that was shipped with your
Before You Begin
workstation.
62 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A