Table of Contents
Advertisement
System Board: Dell Latitude V710/V740 Service Manual
g. Reinstall the hard drive cage, and reinstall the two M2.5 x 5-mm screws that secure
the hard drive cage to the system board.
h. Reinstall the floppy drive cage, and reinstall the two M2.5 x 5-mm screws that
secure the floppy drive cage to the system board.
2. Replace the speakers.
3. Replace the
microprocessor
removed from the old system board.
NOTICE:
Route cables so that they will not be crimped or pinched when the complete
assembly is put back together.
4. Replace the
palm
5. Replace the
video board
6. Replace the
display assembly
7. Replace the
floppy
8. If applicable, replace the PC Card in the PC Card slot.
9. Replace the battery.
10. Connect the AC adapter to your computer and to an electrical outlet.
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray
screws remain inside the computer. Failure to do so may result in damage to the
computer.
11. Turn on the computer.
12. Insert the floppy disk or CD that accompanied the replacement system board into the
appropriate drive, and turn on the computer. Follow the instructions on the screen.
NOTE:
After replacing the system board, enter the computer service tag sequence into
the BIOS of the replacement system board.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/sysboard.htm (7 of 8) [2/28/2004 8:22:19 AM]
and the
microprocessor thermal-cooling assembly
rest.
and the
EMI shield
and the keyboard.
drive,
optical
drive, modem,
that you removed from the old system board.
memory
module, and
that you
hard
drive.
Advertisement
Table of Contents
