Table of Contents
Advertisement
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE:
Read
procedure.
1. Remove the keyboard.
2. Remove the
display
3. Remove the
display
4. Remove the two M2 x 3-mm screws on the left side of the display panel.
5. Remove the two M2 x 3-mm screws on the right side of the display panel.
6. Remove the M2.5 x 5-mm screw that secures the display-feed flex cable to the display
assembly.
7. Unsnap the flex-cable retention bracket from the top cover, and lift the bracket out of the
display assembly.
1 flex-cable retention
bracket
8. Lift the display panel from the top, and rotate the display panel out of the top cover.
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (6 of 10) [2/28/2004 8:22:14 AM]
"Preparing to Work Inside the
assembly.
bezel.
Computer" before performing the following
Advertisement
Table of Contents
