Table of Contents
Advertisement
Memory Module, Modem, Optical Drive, and Floppy Drive: Dell Latitude V710/V740 Service Manual
1
ZIF connector
2
securing tab
3
flex cable
3. Slide the floppy drive into the bay until the drive is fully seated.
4. Replace and tighten the two M2.5 x 5-mm screws.
5. Install the battery.
6. Turn on the computer and try using the floppy drive.
If the computer does not detect the floppy drive, you may have improperly
inserted the flex cable. If so, disconnect the flex cable and reconnect it to the ZIF
connector.
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/upgrades.htm (17 of 18) [2/28/2004 8:22:12 AM]
Advertisement
Table of Contents
