Table of Contents
Advertisement
DIVAR IP 2000
Notice!
Do not turn off the unit during the process. This will damage
the Recovery media.
3.
4.
5.
See also:
–
8.3
Backing up the configuration
Following procedure describes how to back up the
configuration.
Notice!
We recommend backing up the configuration frequently so that
recent backups are always available if required.
To back up the configuration:
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
The unit starts from the Recovery media. If the setup is
successful, press Yes to restart the system.
Windows performs the initial setup of the operating system.
The unit restarts after Windows has completed the setup.
After the restart of the unit, the factory settings are
installed.
Backing up the configuration, page 25
In the DIVAR IP configuration, expand System, then click
Service.
To back up the configuration, click Back up. A dialog box is
displayed.
Click Save. Where the configuration is saved depends on
the browser settings.
Note: If you want to select a specific target directory for
the backup file, click the arrow to the right of the Save
button, then click Save as.
To find the backup, click the Windows Start button, enter
downloads in the search box, then press ENTER.
A dialog box containing the backup file is displayed.
Maintaining the system | en
2014.07 | V1 | DOC
25
Hide quick links:
Advertisement
Table of Contents
