Menu #2-Advanced Features; Menu #1 - Basic Features; Feature Descriptions - Clifford Matrix 2 Installation Manual

Menu #2 - Advanced Features
Feature One Chirp
Number Setting
2-1 Siren
2-2 30-second siren duration*
2-3 False Alarm Control Technology ON
2-4 Progressive door trigger
2-5 Valet switch input: 1 pulse
2-6 Door trigger error chirp ON
2-7 Ignition-controlled domelight ON
2-8 Single unlock pulse
2-9 Channel 3: Validity

Feature Descriptions

The features of the system are described below. Features that have additional settings that can be
selected only when programming with the PC interface or Bitwriter are indicated by the following
icon:

Menu #1 - Basic Features

1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when
the transmitter is used. When set to passive, the system will arm automatically 30 seconds after the
last door is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the
door is closed. This provides the consumer with an audible warning prior to the system actually
arming. At the 30 second mark, the system will arm but the siren will not chirp.
1-2 CHIRPS ON/OFF: This feature controls the chirps that confirm the arming and disarming of
the system.
1-3 IGNITION CONTROLLED DOOR LOCKS ON/OFF: When turned on, the doors will
lock three seconds after the ignition is turned on and unlock when the ignition is turned off.
The TechSoft Programmer (P/N 996T) or the Bitwriter (P/N 998T) will display separate steps for
ignition lock and ignition unlock. They can be programmed on or off independently.
16
Two-Chirp
Setting
Horn honk
60-second siren duration*
False Alarm Control Technology OFF
Instant door trigger
Valet switch input: 2-5 pulses
Door trigger error chirp OFF
Ignition-controlled domelight OFF
Double unlock pulse
Channel 3: latched/latched, reset
with ignition/30-second timed/
second unlock output
© 2001
Directed Electronics, Inc.