Connecting The Printer To The Variquest™ Design Center 1000 Or Pc - Variquest Awards Maker 400 User Manual

7. Connecting the Printer to the VariQuest™ Design Center
1000 or PC
Use the USB cord that is supplied with your printer to connect to the VariQuest™ Design Center
1000 or PC. Do not use a parallel or serial cable.
You can connect the Awards Maker 400 to any available USB port on the Design Center 1000.
Connect to any
USB Port
Note: This printer complies with FCC "Rules and Regulations," Part 15, for Class A Equipment, using
fully shielded six-foot data cables. Use of longer cables or unshielded cables may increase radiated
emissions above the Class A limits. The power supply barrel connector must be inserted into the
power jack on the back of the printer before connecting the communication cables.
VariQuest™ Awards Maker 400
Important!
9