Checking The Connection - Yamaha PJP-20UR Quick Start Manual

Checking the Connection

Follow the procedure below to check whether
the PC recognizes this unit properly.
• Check that this unit is recognized properly
while all the peripheral devices are connected.
• If the microphones cannot pick up audio and/
or you cannot hear any sounds from this unit's
speaker when you are using this unit for a Web
conference, this unit may not be selected as a
sound playback and/or recording device on the
Web conference software. Refer to the owner's
manual of the Web conference software and
check the settings.
■
When using Windows XP/
Windows 2000
In this procedure, Windows XP is used as an
example.
1
Click the "start" menu and click
"Control Panel".
2
Click "Sounds, Speech and
Audio Devices".
3
Click "Sounds and Audio
Devices".
The "Sounds and Audio Devices
Properties" box opens.
4
Click the "Audio" tab.
Click
5
Check the settings.
• "Default device" in "Sound
playback": Yamaha PJP-20UR
• "Default device" in "Sound
recording": Yamaha PJP-20UR
y
Normally, "Yamaha PJP-20UR" is automatically
selected when this unit is connected to the PC. If
"Yamaha PJP-20UR" is not selected, select it
manually.
6
Click the "Voice" tab.
7
Check the settings.
• "Default device" in "Voice
playback": Yamaha PJP-20UR
• "Default device" in "Voice
recording": Yamaha PJP-20UR
Check
Check
Click
Check
Check
English 13