Step 2: Checking The Connection - Yamaha PJP-25UR - USB VoIP Desktop hands-free User Manual

Step 2: Checking the connection

After connecting this unit to the computer, follow the
procedure below to check whether the computer
recognizes this unit properly. In this procedure, Windows
XP is used as an example.
1
From the taskbar. select [Start] - [Control
Panel].
2
Click "Sounds, Speech, and Audio
Devices".
3
Click "Sounds and Audio Devices".
The "Sounds and Audio Devices Properties" screen
appears.
4
Click the "Audio" tab.
5
Configure the settings as shown below.
• "Default device" in "Sound playback":
YAMAHA PJP-25UR
• "Default device" in "Sound recording":
YAMAHA PJP-25UR
y
Normally, "YAMAHA PJP-25UR" is automatically
selected when this unit is connected to the computer.
6
Click
Change
Change
6
Click the "Voice" tab.
7
Configure the settings as shown below.
• "Default device" in "Voice playback":
YAMAHA PJP-25UR
• "Default device" in "Voice recording":
YAMAHA PJP-25UR
y
Normally, "YAMAHA PJP-25UR" is automatically
selected when this unit is connected to the computer.
8
Click "OK" to close the "Sounds and
Audio Devices Properties" screen.
Click
Change
Change