Advertisement
È
É
Ê
5
6
7
8-7
IGNITION SYSTEM
THROTTLE OVERRIDE SYSTEM (T.O.R.S.)
If the carburetor or throttle cable should malfunction
during operation, T.O.R.S. will operate when the
throttle lever is released.
T.O.R.S. is designed to interrupt the ignition and
keep the engine revolutions between 2,800 and
3,000 r/min if the carburetor fails to return to idle
when the lever is released.
WARNING
• If T.O.R.S. operates, make sure that the cause
of the malfunction is corrected and that the
engine can be operated without a problem
before restarting the engine.
• Be sure to use the standard resistance-type
spark plug and ignition coil. Otherwise,
T.O.R.S. will not work properly.
Status È
Idling or
Switch
starting
Throttle switch
OFF
Throttle posi-
CLOSE
tion sensor
Engine
Running
1 Throttle valve (throttle position sensor)
2 Throttle switch
3 Throttle cable
4 Throttle stop screw
a ON
b OFF
c Open
d Close
NOTE:
When the T.O.R.S. is activated, the warning light 5
and self-diagnosis warning indicator 6 will flash
and the two-digit error code "84" 7 will flash in the
tripmeter/odometer display.
ENGINE STOP SWITCH
1. Disconnect:
• Engine stop switch coupler
2. Connect:
• Pocket tester
–
+
ELEC
É
Ê
Running
Trouble
ON
OFF
OPEN
OPEN
T.O.R.S. will
Running
operate
Advertisement
Chapters
