Table of Contents
Advertisement
1. How can I permanently change a part of
my program?
VIEW
Press
and
PRGM
time/temperature schedule you want. Then
press
or
change the program. See PROGRAMMING
YOUR THERMOSTAT.
2. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
34
QUESTIONS AND ANSWERS
ADV
until you reach the
DAY
TIME
and
and
TIME
FWD
BACK
to the time/temperature mode. To resume
programming, press
the point where you stopped programming.
Then you may continue to program the
thermostat normally. If you want to stop
to
programming at this point, press
start the normal program function. See PRO-
GRAMMING YOUR THERMOSTAT.
3. What happens if the electricity goes off
or is manually shut off?
If you have not installed a 9 volt alkaline
battery, the display will go blank and the
program will be lost in five seconds. When
electricity is restored, the thermostat will
maintain a heating temperature of 64°F and
VIEW
until you return to
PRGM
RUN
to
PRGM
Advertisement
Table of Contents
