Arm Chair Set-Up; Automatic Changeover; Fan Control, Programmable; Changement Automatique - White Rodgers Comfort-Set III Operating Instructions Manual

Digital thermostats
Hide thumbs Also See for Comfort-Set III:
Table of Contents

Advertisement

Arm Chair Set-Up.

The thermostat uses 24 VAC power
supplied by the system for normal
operation. However, if the installed
"AA" batteries are providing sufficient
power, you can set-up the thermostat
away from the wall. If the thermostat
indicates low battery power (CHECK
BATTERY), refer to the Battery Back-
up feature (page 20).
Programmable Fan Control.
This feature allows you to have your
fan operate continuously through the
OCCUPIED mode (page 10, step 1).
This is useful if you want to have
constant air circulation in your location
during a specific time period. If you do
not use this feature, the fan will cycle
normally with the heating and cooling
system.

Automatic Changeover.

If you have a heating/cooling system,
the thermostat can be set to automati-
Réglage à distance.
Le thermostat fonctionne sur une alimenta-
tion de 24 V.c.a. fournie par le système pour
un fonctionnement normal. Cependant, si
les piles "AA" fournissent suffisamment
d'énergie, vous pouvez régler le thermostat
à distance. Si le thermostat indique que les
piles sont faibles (CHECK BATTERY),
reportez-vous à la section sur la fonction
des piles de secours (page 20).
Commande programmable du
ventilateur.
Cette fonction vous permet de faire
fonctionner le ventilateur en continu
durant le mode OCCUPIED (habité)(page
10, étape 1). Cette fonction est
particulièrement pratique lorsque vous
voulez que l'air circule continuellement
à l'intérieur pendant une période de
temps donnée. Si vous n'utilisez pas
cette fonction, le ventilateur fonctionnera
normalement avec le système de chauffage
ou de climatisation.

Changement automatique.

Si vous possédez un système de chauffage
et climatisation, le thermostat peut être
réglé pour passer automatiquement du
16
Ajustes a distancia.
El termostato utiliza una corriente de
24 V CA proporcionada por el sistema
para un funcionamiento normal. Sin
embargo si las pilas "AA" proporcionan
una energía suficiente, puede ajustar
el termostato a distancia. Si el termostato
indica que las pilas están débiles (CHECK
BATTERY), vea la sección Pilas de
Reserva (página 20).
Control programable del ventilador.
Esta función le permite que el ventilador
funcione continuamente durante el modo
OCCUPIED (en uso) (página 10, paso 4).
Esto es útil si desea que haya una corriente
continua de aire durante un periodo
específico. Si no utiliza esta opción, el
ventilador funcionará normalmente con el
sistema de calefacción o de refrigeración.
Cambio automático.
Si tiene un sistema de calefacción y
refrigeración, el termostato puede ser
ajustado para que cambie automática-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents