Glass Door - Carrier BT30RF- EXPR Service & Installation Manual

DOOR HANDLE & LOCK REPLACEMENT
SOLID DOOR
The door handle can be removed or replaced by
removing the two chrome plug buttons in each end of
the handle, "A".
The lock mechanism can be removed by drilling out
the two pop rivets in the stainless steel cam cover –
"B".
Access can be gained to the retainer clip which holds
the lock barrel in place. The lock can now be removed.

GLASS DOOR

B B
B B
The door handle can be removed or replaced by
pulling the door gasket out of its retaining groove just
behind the door handle and inserting a philips head
screwdriver into the recessed holes provided.
Retainer screws hold the handle in place.
The lock mechanism is not replaceable on glass door
models.
B B
B B
A A
A A
MAINTENANCE & REPAIR 51