Programmable Softkeys; Features And Key Labels - Aastra 6757i User Manual

Chapter 2, Getting Started
Key
Optional Expansion
Modules

Programmable Softkeys

The 6757i has the following keys:
•
6 Top softkeys – Static programmable softkeys that support up to 10 programmable
functions, with corresponding status lamps for line appearances.
•
6 Bottom softkeys – Context-sensitive state-based softkeys that support up to 20
programmable functions, with corresponding status lamps for line appearances. See
Softkey Display

Features and Key Labels

Softkeys are configured by the system administrator according to the requirements of
your organization. You may or may not have some of the features listed in the table
below.
The 6757i softkeys can be configured for any or all of the following features.
Key Name
Line/Call
Appearances
10
Description
Top Softkeys – 6 static programmable softkeys displaying at the
top of the LCD screen supporting up to 10 programmable
functions, with corresponding status lamps.
--------------------------------------------------------------------------------
Bottom Softkeys - 6 Context-sensitive state-based softkeys
displaying at the bottom of the LCD screen supporting up to 20
programmable functions, with corresponding status lamps.
By default, keys 1 through 6 have no assigned functions. You can
configure all 6 bottom softkeys to perform specific functions.
However, after you lift the handset, there are specific static
softkeys that display and cannot be changed.
•
1 - DIAL - Allows you to dial out on the phone.
•
2 - CONF - Begins a conference call with the active phone.
•
3 - XFER - Transfers the active call to another number.
The M670i or M675i Expansion
36 softkeys on each M670i Expansion Module, and up to 60
softkeys on each M675i Expansion Module. (The 6757i IP Phone
allows up to 3 expansion modules on each phone).
below.
Key Label
(10-character
display)
N.A.
Module(s) provide an additional
Description
Line/call appearances.
Aastra – 2737-007