Phone Features; General Requirements; Headset/Handset Connection; Handset - Aastra 6757i User Manual

Chapter 1, Introduction

Phone Features

•
11-line graphical LCD screen (144 x 128 pixels) with white backlight.
•
12 multi-functional softkeys.
–
–
•
4 line/call appearance keys with corresponding status lamps.
•
Supports up to 9 lines.
•
Full-duplex speaker for handsfree calls.
•
Headset support (modular connector).
•
Built-in two-port, 10/100 Ethernet switch allowing you to share a connection with
your computer.

General Requirements

The 6757i requires the following environment:
•
A SIP-based IP PBX system or network installed and running with a SIP account
created for the 6757i.
•
Access to a Trivial File Transfer Protocol (TFTP) server.
•
Ethernet/Fast Ethernet LAN (10/100mb).
•
Category 5/5e straight through cabling.
•
Power Options:
–
–
–

Headset/Handset Connection

Handset

Turn the phone over and locate the handset jack marked
cord into the jack until it clicks into place. Then route the handset cord through the
groove as shown in the illustration below. Attach the handset to the other end of the
handset cord.
2
6 Top Keys: Static programmable softkeys – (up to 10 programmable functions).
6 Bottom Keys: State-based programmable softkeys - (up to 20 programmable
functions).
Power over Ethernet (PoE) 802.3af
Inline power injector – An optional accessory necessary only if your network
provides no inline power.
AC power adapter, included with the phone.
. Insert one end of handset
Aastra – 2737-007