Key Description - Mitel 6867i Installation Manual

Mitel 6867i SIP Phone Installation Guide

KEY DESCRIPTION

The following table describes the keys on the 6867i SIP Phone.
KEY
5
DESCRIPTION
Goodbye Key - Ends an active call. The Goodbye key also exits an open list,
such as the Options List, without saving changes.
Hold Key - Places an active call on hold. To retrieve a held call, press the call
appearance button beside the light that is flashing.
Options Key - Accesses services and options to customize your phone. Your
System Administrator may have already customized some of your settings.
Check with your System Administrator before changing the administrator-only
options.
Mute Key - Mutes the microphone so that your caller cannot hear you (the light
indicator flashes when the microphone is on mute).
Volume Controls - Adjusts the volume for the handset, ringer, and handsfree
speaker.
Callers List Key - Accesses a list of the last 200 calls received.
Redial Key - Accesses a list of the last 100 previously dialed numbers.
Pressing the Redial key twice redials the last dialed number.
Line/Call Appearance Keys - Connects you to a line or call. The Mitel 6867i
IP Phone supports two line keys, each with LED indicator lights.
Speaker/Headset Key - Transfers the active call to the speaker or headset,
allowing handsfree use of the phone.
Directory Key - Accesses a directory of names and phone numbers (stored
in alphabetical order).
Navigation/Select Keys - Multi-directional navigation keys allow you to
navigate through the phone's user interface. Pressing the center Select key
selects/sets options and performs various actions (such as dialing out when in
the Directory, Callers, and Redial Lists).