12
Other connections
Line Output setting
Use to select the audio down-mix method
when outputting Dolby Digital multi-channel
sound sources from the AUDIO OUT jacks.
SETUP
1
Press SETUP.
ENTER
2
Select 'Sound Setup', then press
ENTER.
ENTER
3
Select 'Line Output', then press
ENTER.
4
Select a setting.
Select one of the following:
• Lo/Ro(Stereo) – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
• Lt/Rt – A surround-compatible downmix
(left-total/right-total, or Lt/Rt) of Dolby
multichannel sources is output, (suitable
for Dolby Surround Pro Logic or other
matrix decoding).
The L.OUT indicator lights.
ENTER
5
Press to exit.
Note
1 • When the Line Output is switched to Lt/Rt, the sound function will be fixed at the current setting and cannot be changed.
The display will briefly flash Line Out Mode if an attempt is made to use a prohibited function.
• When the Line Output is to Lo/Ro(Stereo), the audio from the analog output jacks may be interrupted, depending on the operation.
• When using DTS multi-channel sound sources, output is in Lo/Ro(Stereo).
60
En
Connecting the S-video output
If your TV has an S-video input, you can use this
1
instead of the standard video output for a
better quality picture.
•
Use an S-video cable to connect the
S-VIDEO OUT to an S-video input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
ANALOG
L
R
AUDIO IN
COAX
DIGITAL IN XM IN HDMI
TV
To S-video input
VIDEO OUT
S-VIDEO
COMPONENT VIDEO
P
P
Y
R
B
VIDEO
VIDEO OUT
3
OUT
IN 2
IN 1